Installing The Water Dispenser Line; Connect The Water Line To The Refrigerator; Check The Water Supply Line - Samsung RSE8KPCW Owners And Installation Manual

INSTALLING OF THE WATER DISPENSER LINE

Connect the water line to the refrigerator

- Slip the compression nut and plastic ferrule
through the plastic tube.
- After inserting the sleeve, tighten the compres-sion
nut onto 1/4" compression fitting(union).
Do not overtighten the compression nut.
NOTE
- Slip the compression ferrule and nut on copper(or plastic) tubing as
shown.
Tighten the comperssion nut onto the com-pression fitting(union).
- Turn water on and check for any leakege.
Waterline must be connected to drinkable water only
NOTE
(Case 2)

Check the water supply line

Connect the water pipe with coupler and tap.
- Close the main water tap.
- Connect coupler "A" to the tap.
- Every join should be protected with sealing tape.
WARRANTY INFORMATION
This water line installation is not covered by the refriger-ator
or ice maker manufacturer's warranty.
Follow these instructions carefully to minimise the risk of
expensive water damage.
Note:
If the coupler does not fit on the current tap, go
the nearest authorised service dealer and purchase
the right couplers fittings.
The water line must be connect-ed
to the cold water pipe.
If it is connected to the hot water
pipe, it may cause the
purifier to malfunction.
COUPLER "A"
29
Compression
Nut
Ferrule
Sleeve
Compression
fitting
Ferrule
Compressi
on Nut
CAUTION
TAP