Connecting To A Macintosh - Samsung SyncMaster 172MP Manual

Setting up Your Monitor

Connecting to a Macintosh

1. Connect the power cord to the DC adapter and then connect the adapter jack to the
DC POWER port on the monitor.
(Voltage is automatically adjusted by the power adaptor.)
2. Connect the signal cable to the D-SUB port on the Macintosh computer.
3. For older model Macintoshes, you need to adjust the resolution control DIP switch on
the Macintosh adapter (optional) referring to the switch configuration table shown on
its rear.
4. Turn on the monitor and Macintosh.
Contact a local Samsung Electronics service center to buy optional items.
PC
DC
POWER Video Audio(ST)
7
New Model
Older Model
Adapter
(Not included)