Table of Contents
Advertisement
The following commands are available.
•
: Tells your PDA phone to wait for specific
Wait For
characters from the TCP/IP server before executing
the next command.
•
Wait For Prompt
prompt coming from the server and then displays the
dynamically generated challenge value. You then enter
the challenge value into your token card, which in turn
generates a response value for you to enter on your
PDA phone. This command takes two arguments,
separated by a vertical bar (l) on the input line.
•
: Transmits specific characters to the TCP/IP
Send
server to which you are connecting.
•
: Transmits a carriage return or line feed (LF)
Send CR
character to the TCP/IP server to which you are
connecting.
•
Send User ID
entered in the User ID field of the Network Preferences
screen.
•
Send Password
the Password field of the Network Preferences screen.
If you did not enter a password, this command
prompts you to enter one. The Password command is
usually followed by a Send CR command.
•
: Tells your PDA phone to wait for a specific
Delay
number of seconds before executing the next
command in the login script.
•
: Reads an IP address and uses it as the IP
Get IP
address for your PDA phone. This command is used
with SLIP connections.
•
: Opens a dialogue box and prompts you to
Prompt
enter certain text; for example, a password or a
security code.
•
: Identifies the last line in the login script.
End
: Detects a challenge-response
: Transmits the user ID information
: Transmits the password entered in
Connectivity Preferences
271
Advertisement
Table of Contents
Troubleshooting
