Samsung SGH-I530 Manual page 227

Conducting IR HotSync Operations
• If you have an external infrared device attached to your
Check your computer's documentation to learn if the
computer supports infrared communication.
To configure HotSync Manager for infrared
communication on a computer:
Click the HotSync Manager icon in the Windows toolbar,
and make sure that Infrared is selected.
• If you have an Infrared option on the HotSync Manager
• If you do not have an Infrared option on the HotSync
228
computer, a driver is probably included with the device.
Consult the documentation included with the device for
information about installing the required driver.
menu, and that option is selected, skip to "Performing an
IR HotSync operation."
Manager menu, complete the following steps:
a. Make sure that
b. From the HotSync Manager menu, select
c. Click the
Local
d. In the Serial Port drop-down list, select the simulated
port that your computer uses for infrared
communication.
is selected on the menu.
Local Serial
tab.
.
Setup