Double Quantity Pad Programming - Samsung CM1029 Owner's Instructions Manual

CM1029-EU-2 2/11/00 4:59 AM
GB
P
+ 30sec
Feature
Double Quantity
Factor Edit
Page 16

Double Quantity Pad Programming

+ 30sec
START BUTTON
Double Quantity Factor Editing
Key Entry
Hold down CANCEL and then
Code No.
(Input desired factor value.)
START
New Code No.
(Input desired factor value.)
START
CANCEL
16
1
Hold down and then press
2
Select desired program code by using NUMBER pads.
3
Press NUMBER pads to set the magnification factor within the range from
1.00 to 9.99.
Default factor is 1.65 preset from the manufacturer for increasing the
cooking time.
Make sure that you set a correct factor between 1.00 and 9.99 for
each memory code number.
4
Press button.
5
Press pad to exit the programming mode.
Though you can successfully set a double quantity factor whose
setting might result in excess of the maximum time allowed for each
power level, the oven does not operate exceeding the maximum
time.
Display
pad.
(Mode cancel)
pad. Hold together for 2 seconds.
Remark
Hold down for 2 sec.
After 1 sec, default value shows
in the display window.
1.00 ~ 9.99 available
(Change the factor if required.)
If you don't want to change
more, press CANCEL to exit
the editing mode.
Skip this step if not necessary.
Skip this step if not necessary.
Skip this step if not necessary.
This exits the editing mode.