How To Operate Double Quantity Pad; Controlling Beep Tone; Error Codes - Samsung CM1029 Owner's Instructions Manual

CM1029-EU-2 2/11/00 4:59 AM

How to Operate Double Quantity Pad

1
Press the Double Quantity pad.
2
Press the desired memory number pad.
Result: Cooking time which was multiplied by the preset factor appears
in the display and cooking starts with time digits counting down.
You don't need to press

Controlling Beep Tone

You can select the beep tone you require. There are 4 sound levels
available.
1
Hold down
seconds.
Result: Beep tone is changed to one level higher than current one.
Beep tone 0 does not make beep sound.
Settings are circulating whenever you press the hidden keys in the following order.
Snd 0 Snd 1
Default tone is Snd 2.

Error Codes

Error Items
Power frequency Error(50/60Hz)
EEPROM Error
Page 17
button to start heating.
and then press NUMBER 0 pad. Hold together for 2
Snd 2 Snd 3 Snd 0 (No sound)
Code Error Beep
One long beep
E1
for 2 sec
One long beep
E5
for 2 sec
P
P
Cause/Remedy
Cause: Power frequency is other than 50 Hz.
Remedy: • Unplug the power cord plug and check if the
power frequency is 50 Hz.
• Plug the power cord in 50 Hz power source and
see If "E1" appears. If the error code is displayed
again even after the correct power source is
provided, contact the nearest service centre.
Cause: Memory IC (EEPROM IC) is not working correctly.
In this case, other features except for memory
function work properly. (You can operate the oven
manually)
Remedy: Press CANCEL pad one or more times and try
to start a memory heating. If the error code "E5"
persists, contact your nearest service centre.
GB
+ 30sec
17