DOUBLE QUANTITY PAD PROGRAMMING
1. Hold down (
) and then press (
together for 2 seconds.
2. Select desired program code by using NUMBER
pads.
3. Press NUMBER pads to set the magnification
factor within the range from 1.00 to 9.99.
Default factor is 1.65 preset from the manufacturer
for increasing the cooking time.
Make sure that you set a correct factor between 1.00 and 9.99 for each
memory code number.
4. Press (
) button.
Press pad to exit the programming mode.
Though you can successfully set a double quantity factor whose setting
might result in excess of the maximum time allowed for each power
level, the oven does not operate exceeding the maximum time.
) pad. Hold
Double Quantity Factor Editing
Feature
Key Entry
Hold down
(
)
CANCEL
(
)
and then
pad.
Code No.
(Input desired
factor value.)
Double
Quantity
(
)
START
Factor
Edit
New Code No.
(Input desired
factor value.)
(
)
START
(
)
CANCEL
CONTROLLING BEEP TONE
You can select the beep tone you require. There are 4 sound levels
available.
Hold down CANCEL (
) and then press NUMBER
0 pad. Hold together for 2 seconds.
Result :
Beep tone is changed to one level
higher than current one.
Beep tone 0 does not make beep sound.
Settings are circulating whenever you press the hidden keys in the
following order.
Snd 0 g Snd 1 g Snd 2 g Snd 3 g Snd 0 (No sound)
Default tone is Snd 2.
14
Display
Remark
Hold down for 2 sec.
After 1 sec, default value
shows in the display window.
1.00 ~ 9.99 available (Change
the factor if required.)
If you don't want to change
more, press CANCEL to exit
the editing mode.
Skip this step if not
necessary.
Skip this step if not
necessary.
Skip this step if not
necessary.
(Mode cancel)
This exits the editing mode.