How To Operate Memory Cooking; Double Quantity Pad Programming - Samsung CM1329A/XEU Owner's Instructions And Cooking Manual

How to Operate Memory Cooking

After having finished memory programming, just press the NUMBER
pad of the memory number you want to select. The oven will
automatically start heating according to the pre-programmed cooking
time and power level.
1. Make sure the oven is plugged into a properly earthed
electrical outlet and "ON" appears in the display window.
2. Open the door.
The oven lamp will be turned on.
3. Put the food into a suitable container, place it in the centre of
the oven and then close the door securely.
Result :
4. Press NUMBER pad.
Result :
The oven lamp will go off.
The selected memory program automatically
starts heating. But, NUMBER pad 1, 2, 3
operate after 2 seconds.

Double Quantity Pad Programming

1. Hold down
for 2 seconds.
2. Select desired program code by using NUMBER pads.
3. Press NUMBER pads to set the magnification factor within
the range from 1.00 to 9.99.
u
4. Press
u
Press pad to exit the programming mode.
Though you can successfully set a double quantity factor whose
setting might result in excess of the maximum time allowed for each
power level, the oven does not operate exceeding the maximum time.
11
and then press pad. Hold together
Default factor is 1.65 preset from the
manufacturer for increasing the cooking time.
Make sure that you set a correct factor between
1.00 and 9.99 for each memory code number.
button.
EN