Checking Or Changing Programmed Cd Tracks; Searching For And Storing The Radio Stations; Selecting A Stored Station; Improving Radio Reception - Samsung MAX-C670 Instruction Manual

Checking or Changing Programmed
CD Tracks
B
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press PROGRAM.
Result: The following indications are displayed:
(CH = Check, 01=Program No,CH 1 = Disc No, – – = Track No on the
disc)
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press PROGRAM.
3
Press PROGRAM again.
Result: The first track selected is displayed, together with the letter CH (Change).
4
Press PROGRAM once or more times until the track to be changed is dis-
played.
5
If necessary, press the corresponding DISC (1, 2, 3) button to change discs.
6
Press and or turn MULTI JOG to select a different track.
7
Press PROGRAM to confirm your change.
8
Press CD/MP3-CD ( ) to start listening to the selection.
Result: The first track selected is played.
5
8
6 1 6
TIMER ON/OFF DEMO/DIMMER SOUND MODE
PROGRAM/SET MEDLEY
AI SLEEP
DISC SKIP SHUFFLE CD REPEAT
8
6
6 1
CD/MP3-CD
TUNING/
VOLUME
ALBUM
DECK TUNING
MODE
1/2
+10
CD SYNCHRO
16
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
15 MW stations
1 Switch the system on by pressing STANDBY/ON.
2
Select the TUNER function by pressing TUNER.
3
Select the required frequency band by pressing TUNER (BAND)
again on the front panel or TUNER (BAND) on the remote control.
Result: The appropriate indication is displayed:
FM Frequency Modulation
AM(MW) Medium Wave
4
To search for a Press TUNING MODE
station...
Manually Once or more times until MANUAL
is displayed.
Automatically Once or more times until AUTO is
displayed.
5
Select the station to be stored by:
Turning the MULTI JOG knob to the right or to the left to increase
or decrease the frequency respectively
or
Pressing TUNING or on the remote control
To scroll through the frequencies faster when searching
manually, hold down the TUNING Down or Up buttons.
CD SYNCHRO CD SYNCHRO CD SYNCHRO CD SYNCHRO
CD SYNCHRO
The automatic search procedure may stop on a frequency that
CD SYNCHRO
does not correspond to a radio station. If this happens, use the
manual search mode.
6 Adjust the volume by:
Turning the VOLUME knob on the front panel
or
Pressing the VOLUME + or – buttons on the remote control
7 Select the FM stereo or mono mode by pressing MONO/ST.
8 If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press MEMORY.
6
Result: The PRGM is displayed for a few seconds.
b Press TUNING Down and Up to assign a program number
between 1 and 15.
c Press MEMORY to store the radio station.
Result: PRGM is no longer flashed and the station is stored.
9 To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program number.
You can also use PROGRAM/SET button on the remote con-
trol to instead of MEMORY button in step 8.
You can listen to a stored radio station as follows:
1
2
1
2,3
3
6
4
5
5
7
5,8
CD/MP3-CD
TUNING/
VOLUME 6
ALBUM
DECK TUNING
1/2 MODE
5,8
+10
4
6
5,8
TA P E
In Tuner mode
In manual tuning mode, you can use MULTI JOG or /
button on the panel front to manual search a radio station.
During Tuner auto searching, press button to stop auto
searching.
In Preset tuning mode, you can use MULTI JOG or /
button on the panel front to search a stored radio station.
CD SYNCHRO CD SYNCHRO CD SYNCHRO
You can improve the quality of radio reception by:
CD SYNCHRO

Selecting a Stored Station

GB
Switch the system on by pressing STANDBY/ON.
Select the TUNER function by pressing TUNER on remote control.
Select the required frequency band by pressing TUNER (BAND) on
the remote control or TUNER (BAND) again on the front panel.
Press the TUNING MODE button on the front panel of the unit, or the
TUNING MODE button on the remote control until "PRESET" is
displayed.
Turning MULTI JOG on the front panel left or right until the desired
station is found or press / to select the desired station.
or
Select the desired station by pressing the station number stored,
using the TUNING ALBUM or button on the remote control.
Result: The desired station is now received.
1
2,3
5
4
TUNING/
VOLUME
ALBUM
TUNING
DECK
MODE
1/2 4
5 +10
5
TA P E

Improving Radio Reception

Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them
permanently
If reception from a specific FM radio station is poor, press MONO/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
17