Checking Or Changing Programmed Cd Tracks; Searching For And Storing The Radio Stations; Selecting A Stored Station; Improving Radio Reception - Samsung MAX-T55 Instruction Manual

Checking or Changing Programmed
CD Tracks
GB
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press PROGRAM.
Result: The following indications are displayed:
(CH = Check, 01=Program No, CH1 = Disc No, – – = Track No on the
disc)
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press PROGRAM.
3
Press PROGRAM again.
Result: The first track selected is displayed, together with the letter CH (Change).
4
Press PROGRAM once or more times until the track to be changed is dis-
played.
5
If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
6
Press and or turn MULTI JOG to select a different track.
7
Press PROGRAM to confirm your change.
8
Press MP3/CD-CD ( ) to start listening to the selection.
Result: The first track selected is played.
5
2,3,4,7
8
1
6
6
MP3-CD / CD
14
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
15 AM stations
1
Switch the system on by pressing STANDBY/ON.
2
Select the TUNER function by pressing TUNER.
3
Select the required frequency band by pressing TUNER (BAND)
again on the front panel or TUNER (BAND) on the remote control.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
4
To search for a Press TUNING MODE
station...
Once or more times until MANUAL
Manually
is displayed.
Once or more times until AUTO is
Automatically
displayed.
5
Select the station to be stored by:
Turning the MULTI JOG knob to the right or to the left to increase
or decrease the frequency respectively
or
Pressing TUNING or on the remote control
To scroll through the frequencies faster when searching
manually, hold down the TUNING Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
6
Adjust the volume by:
Turning the VOLUME knob on the front panel
or
Pressing the VOLUME + or – buttons on the remote control
Select the FM stereo or mono mode by pressing MO/ST.
7
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press TUNER MEMORY.
Result: The PRGM is displayed for a few seconds.
b Press TUNING Down and Up to assign a program number .
c Press TUNER MEMORY to store the radio station.
6
Result: PRGM is no longer flashed and the station is stored.
8 To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program number.
1
2,3
6
5
MP3-CD / CD
6
5
MUTE
TUNING/
VOLUME
ALBUM
5
6
TUNING
SURROUND MODE SOUND MODE
MODE
+10 +10
4
In Tuner mode
In manual tuning mode, you can use MULTI JOG or /
button on the panel front to manual search a radio station.
During Tuner auto searching, press button to stop auto
searching.
In Preset tuning mode, you can use MULTI JOG or /
button on the panel front to search a stored radio station.

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing STANDBY/ON.
2
Select the TUNER function by pressing TUNER(BAND) .
3
Select the required frequency band by pressing TUNER (BAND) on
the remote control or TUNER (BAND) again on the front panel.
4
Press the TUNING MODE button on the remote control until
"PRESET" is displayed.
5
press on the front panel of the unit to select the desired
/
station.
or
Select the desired station by pressing the
TUNING / ALBUM or button on the remote control.
7
Result: The desired station is now received.
1
2,3
MP3-CD / CD
POWER
OPEN/
DISC SKIP
CLOSE
MUTE
1
VOLUME
TIMER ON / OFF TIMER / CLOCK PROGRAM / SET
AI SLEEP SHUFFLE CD REPEAT
SURROUND MODE SOUND MODE
MO/ ST DEMO DIMMER
REC / PAUSE TAPE 1/2 COUNTER RESET

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them
permanently
If reception from a specific FM radio station is poor, press MONO/ST
to switch from stereo mode to mono. The quality of the sound will be
improved.
GB
TUNING/
5
ALBUM
4
TUNING
MODE
+10 +10
15