Adjusting Picture Alignment Automatically (Sv-H35K Only); Adjusting Picture Alignment Manually; Intelligent Picture Control - Samsung SV-H35K Instruction Manual

01823T SV-H625K/AFR-GB3 3/21/03 5:08 PM
Playing a Cassette
This function allows you to play back any pre-recorded cassette.
TRK PROG
2
3
REC MENU
OK
GB
Adjusting Picture Alignment Automatically
(SV-H35K Only)
The Picture Alignment feature enables you to optimize the tape
position automatically to obtain the best possible picture.
A.TRK IPC INPUT
When noise bars or streaks appear during playback, adjust picture
REPEAT
alignment by pressing the A.TRK button.
AUDIO DISPLAY
Result:
TRK PROG

Adjusting Picture Alignment Manually

The Picture Alignment feature allows you to adjust the alignment
manually to obtain the best possible picture.
(SV-H625K/SV-H85K) (SV-H35K)
A.TRK IPC
When noise bars or streaks appear during playback, adjust alignment
REPEAT manually by pressing the PROG/TRK (œ or ❷) / TRK (
until the picture is clear and stable.
DISP./
UDIO
L PROG/TRK
TRK PROG
Result:
28
Page 28
1
Switch on both the television and your VCR.
2
Insert the video cassette to be played. If the safety tab on the
❿ II
cassette is intact, press .
Otherwise, the cassette is played automatically.
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this VCR.
3 To... Then press...
Stop the playback (STOP).
Eject the cassette (EJECT).
The tracking bar appears.
The picture is automatically adjusted.
The tracking bar disappears when digital auto tracking has
been completed.
or
The tracking bar appears.
The image is adjusted.
The tracking bar disappears when you release the button.

Intelligent Picture Control

The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1 During playback, press the MENU button on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding ,
œ
USER SET option.
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding œ or
selected.
Press the ❿¤button to select the IPC (intelligent picture control)
5
option.
When intelligent picture control mode is
of the image is adjusted automatically.
6
To adjust the sharpness manually, press the
IPC mode OFF .
Press the ➛ or ❿ buttons until the picture is displayed according to
7
your preferences.
To adjust the sharpness manualy press the SHARPNESS ➛ or ❿¤
button on the front of VCR.(* SV-H625K only)
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
8
On completion, press the MENU button again.
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the IPC button on the remote control.
2 Press the button to turn the IPC (intelligent picture control)
❷
option ON and OFF .
When intelligent picture control mode is
of the image is adjusted automatically.
3 To adjust the sharpness manually, select intelligent picture control
mode OFF .
The horizontal picture adjusting appears.
) buttons
Press the ➛ or ❿ buttons until the picture is displayed according to
4
your preferences.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
5 On completion, press the IPC button again.
PROG OPTIONS OPTIONS
CLOCK BONUS
or ➛, ❿ buttons to select the
❷¤
USER SET
➛❿¤¤
œ ❷¤¤ OK
❷ buttons, until the IPC option is
OPTIONS
OSD
TAPE SELECT
COLOUR SYSTEM
ON , the sharpness
IPC
❷ button to turn the
❿
œ ❷
(SV-H35K Only)
CLR/RST
A.TRK
ON , the sharpness
AUDIO
TRK
** PICTURE
IPC
SOFTEN
--------
➛❿
INSTALL
LANG
END: MENU
:ON
:E180
:AUTO
:ON
GB
END: MENU
F.ADV INDEX
IPC INPUT
REPEAT
1
DISPLAY
PROG
**
: OFF
SHARPEN
*
-----
ON/OFF: ❷
29