VERVIEWS Front View of the VCR................... Rear View of the VCR ................... The instructions in this manual are for models, SV-H620K, SV-H80K and SV-H30K. Infrared Remote Control ................Before you start reading this manual please check your model number. Display Indicator ....................
75%). Audio Dubbing a Pre-recorded Cassette (SV-H620K Only) ......THER UNCTIONS AND SEFUL ECOMMENDATIONS Using the TV Buttons on the Remote Control (SV-H620K Only)....Auto Power Off ....................Technical Specifications ................OLVING ROBLEMS Problems and Solutions................. TV Frequency Table (System B/G-D/K) ............
01823S SV-H620K/DIN-GB1 3/21/03 5:02 PM Page 6 Front View of the VCR Rear View of the VCR (SV-H620K) SHARPNESS EJECT RECORD VIDEO CASSETTE BUTTON BUTTONS BUTTON COMPARTMENT BUTTON STANDBY/ON BUTTON BUTTON AERIAL IN AV2 (DEC./EXT.) SCART CONNECTOR (EURO-21) SOCKET PLAY...
DISPLAY PROGRAMME SELECTION BUTTON AUDIO MUTE BUTTON PROG DISPLAY BUTTON You have just purchased a SAMSUNG Video Cassette Recorder (VCR). STOP BUTTON PLAY/PAUSE/STILL BUTTON REWIND/REVERSE PICTURE Together with your VCR, you will find the following accessories in the box. FAST-FORWARD/FORWARD...
Example: You wish to take advantage of the quality of your Hi-Fi stereo system when watching a programme or recording via your VCR. (SV-H620K only) Whenever you connect an audio or video system to your VCR, ensure that all elements are switched off.
01823S SV-H620K/DIN-GB1 3/21/03 5:02 PM Page 12 Connecting a Decoder for scrambled PAY TV broadcasts Connecting Your VCR to the Satellite receiver or Other Equipment You can connect your VCR to the Satellite receiver or other VCR using the SCART cable if the appropriate outputs are available on the equipment chosen.
01823S SV-H620K/DIN-GB1 3/21/03 5:02 PM Page 14 Plug & Auto Set Up Tuning Your Television for the VCR Your VCR will automatically set itself up when it is plugged into the You must tune your television for the VCR only if you are not using mains for the first time.
01823S SV-H620K/DIN-GB2 3/21/03 4:51 PM Page 16 Inserting Batteries in the Remote Control Displaying/Hiding On-Screen Information You must insert or replace the batteries in the remote control when Your VCR displays most information both on the VCR and the you: television.
01823S SV-H620K/DIN-GB2 3/21/03 4:51 PM Page 18 Setting the VCR Output Channel Presetting the Stations Automatically You do not need to preset the stations if you have already Your VCR output channel may need to be changed if the pictures set them automatically (see Plug &...
01823S SV-H620K/DIN-GB2 3/21/03 4:51 PM Page 20 Presetting the Stations Manually Clearing a Preset Station You do not need to preset the stations manually if you have already set them automatically. If you have stored a TV station: To enable the VCR to decode a scrambled TV station, the That you do not require decoder must be switched on.
01823S SV-H620K/DIN-GB2 3/21/03 4:51 PM Page 22 Switching between the TV and VCR Modes Changing the Preset Station Table The TV/VCR button allows you to record one channel with the VCR You can rearrange the preset TV stations according to your own while you watch another channel on the TV.
NICAM mode is displayed. : Normally set at this position. On completion, press MENU twice to exit the menu. Selecting the Recording Speed (SV-H620K/SV-H80K Only) You can record a cassette at two different speeds: SP (Standard Play) Type Recording Time (in SP) E-180 180 mins.
(SV-H620K/SV-H80K) (SV-H30K) can be seen on the television. Switch on the television. INPUT INPUT With SV-H620K/SV-H80K, you can select the recording speed MENU To monitor the programme being recorded, select the television (SP/LP). Press the SPEED button. REPEAT REPEAT channel reserved for use with your VCR (or the AV input if used).
-- ---- --:-- --:---- -- ---- --:-- --:---- Cancelling a Preset Recording With SV-H620K/SV-H80K, you can select the recording speed. -- ---- --:-- --:---- a. Press ❿ to select the the recording speed (AUTO/SP/LP). -- ---- --:-- --:---- -- ---- --:-- --:---- b.
Press the ➛ or ❿ buttons until the picture is displayed according to your preferences. To adjust the sharpness manualy press the SHARPNESS ➛ or ❿ Adjusting Picture Alignment Automatically button on the front of VCR.(* SV-H620K only) (SV-H30K Only) If you do not press a button within ten seconds, the PICTURE menu disappears automatically.
01823S SV-H620K/DIN-GB3 3/21/03 4:53 PM Page 32 Selecting the Audio Output Mode (SV-H620K Only) Format 16:9 (WIDE SCREEN) Your VCR can automatically read a 16:9 signal from the AV2 input or a prerecorded 16:9 tape. It can broadcast a 16:9 signal through When monitoring a TV programme or playing back a Hi-Fi a 21 pin scart cable.
01823S SV-H620K/DIN-GB3 3/21/03 4:53 PM Page 34 Playing a Cassette in Slow Motion You can play a cassette in slow motion. No sound is heard when playing back a cassette in slow motion. SLOW Press: SHUTTLE ❿ II to start playing the cassette...
01823S SV-H620K/DIN-GB4 3/21/03 4:54 PM Page 35 Picture Search, Fast Forward/Rewind Picture Search enables you to Fast Forward or Rewind and look for a particular part of a tape. Press PLAY, the VCR will enter normal play mode. While in play, ❿...
01823S SV-H620K/DIN-GB4 3/21/03 4:54 PM Page 36 Searching for a Specific Sequence Auto Repeat Play You can set repeat play to repeat the tape continuously from Each time you record a cassette on this VCR, an “index” is automatically marked on the tape when recording starts.
Plug the other end of the audio cable into the appropriate output Once to display the current function, programme connectors on the other system (VCR, camcorder or Hi-Fi sound (SV-H30K) number, recording speed (SV-H620K/SV-H80K only), system). date, time and counter Twice to display the counter only...
3/21/03 4:54 PM Page 40 Using the Assemble Edit Function Audio Dubbing a Pre-recorded Cassette (SV-H620K Only) This function allows you to start a new recording at a specific With the Audio Dubbing function, you erase the previously position on the cassette while maintaining a very smooth scene change.
Using the TV Buttons on the Remote Control Auto Power Off (SV-H620K/SV-H80K Only) Your VCR remote control will work with Samsung televisions and The Auto Power Off feature automatically turns off your VCR if no compatible brands. signal is received and you do not press any button for the selected time.
01823S SV-H620K/DIN-GB4 3/21/03 4:54 PM Page 44 Technical Specifications Problems and Solutions Before contacting the Samsung after-sales service, perform the following simple checks. Design and specifications are subject to change without notice. Problem Explanation/Solution No power Check that the power plug is connected to a wall outlet.