Checking A Preset Recording; Cancelling A Preset Recording; Playing A Cassette; Adjusting Picture Alignment Automatically (Sv-270 Only) - Samsung SV-270 Instruction Manual

Checking a Preset Recording

You can check your preset recordings:
When you have finished presetting the VCR
If you have forgotten which programmes will be
recorded
1
- Insert the cassette. Press the TIMER button.
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the OK button to select TIMER
PROGRAMMING option.
Result: The TIMER PROGRAMMING menu is
displayed.
2
Press the or ❷ buttons to select the required
programme.
➛ ❿
3
Press the or buttons to select and change any
values as required. For more details, refer to the
previous page.
4
On completion, press MENU twice.

Cancelling a Preset Recording

You can cancel any programmes that are:
Incorrect
No longer required
1
- Insert the cassette. Press the TIMER button or,
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the OK button to select TIMER
PROGRAMMING option.
Result: The TIMER PROGRAMMING menu is
displayed.
2
Select the programme to be cancelled by pressing
the or ❷ buttons.
3
Press the CLR/RST button to cancel the selected
programme.
Result: All the recording information is deleted and
the broadcast will not be recorded.
4
On completion, press MENU twice.

Playing a Cassette

This function allows you to play back any pre-recorded
cassette.
1
Switch on both the television and your VCR.
2
Insert the video cassette to be played. If the safety
tab on the cassette is intact, press
Otherwise, the cassette is played automatically.
When a cassette is loaded, the tape position is
optimized automatically to reduce disturbance
(Digital Auto Tracking). When playing a
cassette, if the end of the tape is reached, the
cassette is rewound automatically.
NTSC tapes can be played back but cannot be
recorded with this VCR.
3
To...
Stop the playback
Eject the cassette
Adjusting Picture Alignment
Automatically
The Picture Alignment feature enables you to optimize
the tape position automatically to obtain the best
possible picture.
When noise bars or streaks appear during playback,
adjust picture alignment by pressing the A.TRK button.
Result: The tracking bar appears.
The picture is automatically adjusted.
The tracking bar disappears when digital
auto tracking has been completed.
Adjusting Picture Alignment
Manually
The Picture Alignment feature allows you to adjust the
alignment manually to obtain the best possible picture.
When noise bars or streaks appear during playback,
adjust alignment manually by pressing the
PROG/TRK( or
the picture is clear and stable.
Result: The tracking bar appears.
The image is adjusted.
The tracking bar disappears when you
release the button.
ENG-19
❿ll .
Then press...
(STOP).
.
(EJECT)
(SV-270 Only)
or
❷ ) / TRK ( ) buttons until