Searching For A Specific Sequence; Auto Repeat Play - Samsung SV-H35K Instruction Manual

01823T SV-H625K/AFR-GB4 3/21/03 5:09 PM

Searching for a Specific Sequence

Each time you record a cassette on this VCR, an "index" is
automatically marked on the tape when recording starts.
SHUTTLE
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
V-LOCK
ST F.ADV INDEX
1
IPC INPUT
➛ ➛¤¤¤¤¤❿ ❿
INDEX:
INTRO SCAN
GB
❿ ❿¤¤¤¤
INDEX SEARCH: +01
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the INDEX button.
34
Page 34
Prev Seq. being Next
etc. Seq. played Seq. etc.
2 1 1 2
This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
1 To search for a specific index, press INDEX.
➛ ➛ ❿ ❿
2 Press the
or buttons depending on the direction
where your desired programme is located.
3 When an Index mark is found the VCR will playback the tape for 5
seconds, after which it will continue searching for the next Index
mark.
4 If you want to watch the tape from a particular Index, simply press
❿ II
.
1 Press the INDEX to start the Index search.
➛ ➛ ❿ ❿
2
Press the or buttons twice more. This will take
you directly to the start of the desired programme is located.
❿ ❿
3 These Index searches can be made forwards: (press
➛ ➛
backwards: (press ).
❿ II
4 To cancel an Index search simply press the or button.

Auto Repeat Play

You can set repeat play to repeat the tape continuously from
beginning to end.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding
EASY OPERATION option.
3 Press the OK button to select this option.
Result: The
EASY OPERATION
4 Press the corresponding
œ
option is selected.
REPEAT PLAY
5 To...
Repeat play
Do not wish to repeat play
6
On completion, press MENU twice to exit the menu.
Interval Repeat Play
You can set interval repeat play to repeat the cassette several times
for special interval.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding
œ
OPERATION option.
3 Press the OK button to select this option.
Result: The EASY OPERATIONN
4
Press the corresponding œ
NO. OF INTERVAL REPEAT
) or
5
To...
Interval repeat play
Cancel interval repeat play
6
On completion, press MENU twice to exit the menu.
7 To select interval during playback, press the INPUT/REPEAT
button at the desired start point.
Result: " INTERVAL REPEAT SETTING
Press the INPUT/REPEAT button one more time at the desired
end point.
Result: The tape is automatically rewound to the start point.
" INTERVAL REPEAT
PROG OPTIONS
CLOCK BONUS BONUS
or ➛, ❿ buttons to select the
,
œ ❷
EASY OPERATION
➛❿¤¤
œ ❷¤¤ OK
menu is displayed.
or buttons, until the
❷
BONUS
AUTO POWER OFF
Press ➛ or ❿, until... REPEAT PLAY
NO. OF
INTERVAL REPEAT : 5
ON is displayed.
OFF is displayed.
❿
œ ❷
PROG OPTIONS
or ➛, ❿ buttons to select the
,
❷ EASY
CLOCK BONUS BONUS
EASY OPERATION
menu is displayed.
➛❿¤¤
œ ❷¤¤ OK
or ❷ buttons, until the
option is selected.
Press ❿, until...
5, 10, 15 is displayed.
BONUS
AUTO POWER OFF
(choose repeat time 5 times,
REPEAT PLAY
10 times, 15 times)
NO. OF
INTERVAL REPEAT : 5
is displayed.
OFF
❿
œ ❷
" is displayed.
" is displayed.
INSTALL
LANG
END: MENU
:OFF
:OFF
GB
END: MENU
INSTALL
LANG
END: MENU
:OFF
:OFF
END: MENU
35