Clearing A Preset Station; Changing The Preset Station Table - Samsung SV-H35K Instruction Manual

01823T SV-H625K/AFR-GB2 3/21/03 5:05 PM

Clearing a Preset Station

If you have stored a TV station:
you can cancel it.
PROG OPTIONS INSTALL INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿¤¤
œ ❷¤¤ OK END: MENU
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
GB
❿
œ ❷ END: MENU
** TV STATION TABLE **
PR CH
1 002
2 ---
3 ---
4 ---
5 ---
❿
œ ❷ SWAPPING:OK
DELETE:CLR/RST MENU
20
Page 20
That you do not require
At the wrong programme position
1 Press the MENU button on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to select the
2 Press the corresponding ,
œ ❷¤
option.
INSTALLATION
3 Press the OK button to select this option.
Result: The menu is displayed.
INSTALLATION
4 Press the corresponding or buttons, until the MANUAL SET
œ ❷
UP option is selected.
Press the ❿ button to select this option.
5
Result: The TV STATION TABLE menu is displayed.
6
Press the corresponding œ or ❷ buttons, until the required preset
TV station (PR) is selected.
7
Press the CLR/RST button.
8 6
Repeat the same procedure from Step onwards until all the
required stations have been cleared.
9
On completion, press the MENU button three times to exit the
menu.

Changing the Preset Station Table

You can rearrange the preset TV stations according to your own
preferences programme number assigned to the station.
1 Press the MENU button on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding œ , ❷¤
INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the MANUAL SET
UP option is selected.
And then press the ❿ button to select this option.
Result: The menu is displayed.
TV STATION TABLE
5
Press the corresponding œ or ❷ buttons, until the required preset
TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
6
To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
7 Press the or buttons to select required position. And then
œ ❷
press OK again to swap the position.
8
You can modify this station by repeating the same procedure from
5
Step onwards.
9 On completion, press the MENU button three times to exit the
menu.
PROG OPTIONS INSTALL INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿¤¤
œ ❷¤¤ OK END: MENU
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
GB
❿
œ ❷ END: MENU
** TV STATION TABLE **
PR CH
1 002
2 ---
3 ---
4 ---
5 ---
❿
œ ❷ SWAPPING:OK
MENU
** TV STATION TABLE **
PR CH
1 ---
2 ---
3 002
4 ---
5 ---
❿
œ ❷ SWAPPING:OK
DELETE:CLR/RST MENU
21