01823T SV-H625K/AFR-GB2
3/21/03 5:05 PM
Displaying/Hiding On-Screen Information
Your VCR displays most information both on the VCR and the
television.
You can choose to display or hide this information on the television
screen (except for the Index, Programming MENU which cannot be
OPTIONS
PROG
OPTIONS
INSTALL
hidden).
CLOCK
BONUS
LANG
USER SET
➛❿¤¤
❷¤¤
OK
END:
MENU
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
IPC
:ON
GB
❿
❷
END:
MENU
Choosing Your Language
You can change the language in which information is displayed on
the screen.
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
LANG
LANGUAGE SET
➛❿¤¤
❷¤¤
OK
END:
MENU
16
Page 16
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding
,
❷
USER SET
option.
3
Press the OK button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
OSD
selected.
Press ➛ or ❿, until...
5
To...
Display on-screen information
ON
is displayed.
Hide on-screen information
OFF
is displayed.
6
On completion, press MENU twice to exit the menu.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding
,
❷
LANGUAGE SET
option.
3
Press the OK button to select this option.
Result:
The
LANGUAGE SET
menu is displayed.
4
Select the required language by pressing the
or
buttons.
❷
5
Press OK to store the language selected.
6
Press MENU to exit the menu.
Result:
From now on, all the on-screen information will be
displayed in the language selected.
Setting the VCR Output Channel
Your VCR output channel may need to be changed if the pictures
suffer from interference or if your TV cannot find the pictures.
Also, you can change the VCR output channel to adjust the
frequency in which information is displayed on the screen.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
INSTALLATION
option.
3
Press the OK button to select this option.
Result:
The
INSTALLATION
4
Press the corresponding
or
CH
option is selected.
option is
5
Select the required output channel (CH21~CH69) by pressing the
➛ or ❿ buttons.
6
On completion, press MENU twice to exit the menu.
Then tune your television again (see page 14).
Selecting the RF OUT Sound Mode (B/G-D/K)
You can choose the sound mode (B/G or D/K ) according to the TV
set connected to your VCR.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
,
❷
INSTALLATION
option.
3
Press the OK button to select this option.
Result:
The
INSTALLATION
4
Press the corresponding
option is selected.
Press the ❿ button to select K or G.
5
6
On completion, press MENU twice to exit the menu.
PROG
OPTIONS
CLOCK
BONUS
INSTALLATION
or ➛, ❿ buttons to select the
,
❷
➛❿¤¤
❷¤¤
OK
menu is displayed.
buttons, until the
❷
VCR OUTPUT
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH :CH36
❿
❷
PROG
OPTIONS
CLOCK
BONUS
or ➛, ❿ buttons to select the
INSTALLATION
➛❿¤¤
❷¤¤
OK
menu is displayed.
or
❷
buttons, until the
TV SYSTEM
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH :CH36
❿
❷
INSTALL
INSTALL
LANG
END:
MENU
:K
GB
END:
MENU
INSTALL
INSTALL
LANG
END:
MENU
:K
END:
MENU
17