Nicam; Intelligent Picture Control; Intelligent Picture Control (Remote Control) - Samsung DVD-V90K Instruction Manual

VCR

NICAM

GB
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
Language : English
sound broadcast and you can select the desired sound.
Please refer to page 37.
Install
User Set
Auto Power Off : Off 1
Screen Messages : On
2
3
4
User Set
Colour System : Auto
5
On
NICAM : On
Off
IPC : On
G-Code Extend : Off
6
24
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the corresponding œ , ❷ buttons to select the
User Set option.
Press the OK or ❿ to select this option.
Result: The User Set menu is displayed.
Press the corresponding œ or ❷ buttons, until the NICAM option
s selected.
Press OK or ❿, until...
To...
Mono mode is displayed.
Off
Off: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode is displayed.
On
On: Normally set at this position.
On completion, press RETURN three times to exit the menu.

Intelligent Picture Control

The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1 During playback, press the MENU button on the remote control.
Result: The Setup menu is displayed.
Press the OK or ❿ .
2
Result: The Setup menu is displayed.
3
Press the corresponding œ , ❷¤ buttons to select the
User Set option.
Press the OK or ❿¤buttons to select this option.
4
Result: The User Set menu is displayed.
5
Press the corresponding œ or ❷ buttons, until the IPC
selected.
Press the Ok or ❿¤buttons to select the IPC (intelligent picture
6
control) option.
When intelligent picture control mode is ON , the sharpness
of the image is adjusted automatically.
7 To adjust the sharpness manually, press the
❷ button to turn the
IPC mode OFF .
Press the ➛ or ❿ buttons until the picture is displayed according to
8
your preferences.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
9
On completion, press the RETURN button again.
Intelligent Picture Control ( Remote Control )
1
During playback, press the IPC button.
Result: The PICTURE menu is displayed.
2 Press the ❷ button to turn the IPC (Intelligent Picture Control)
option ON and OFF .
When Intelligent Picture Control mode is ON , the sharpness
of the image is adjusted automatically.
3
To adjust the sharpness manually, select Intelligent Picture Control
mode OFF .
The horizontal picture adjusting appears.
Press the ➛ or ❿ buttons until the picture is displayed according to
4
your preferences.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
5 On completion, press the IPC button again.
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
option is
User Set
Colour System : Auto
NICAM : On
On
IPC : On
Off
G-Code Extend : Off
VCR
OK
1
25
GB