Selecting The Rf Out Sound Mode (G-I-K-B-M); Setting The Dvd-Vcr Output Channel; Selecting The Colour Mode - Samsung DVD-V90K Instruction Manual

VCR

Selecting the RF OUT Sound Mode (G-I-K-B-M)

GB
You can choose the sound mode (G,I,K,B or M) according to the TV
set connected to your VCR.
Language : English
1
Install
User Set
Auto Power Off : Off
Screen Messages : On
2
3
4
Install
Auto Setup
Manual Setup G
TV System : G I 5
VCR Output CH : CH 36 K
B
6
M
VCR

Setting the DVD-VCR Output Channel

Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
Language : English
pictures.
Also, you can change the DVD-VCR output channel to adjust the
Install
frequency in which information is displayed on the screen.
User Set
Auto Power Off : Off
Screen Messages : On
1
2
3
Install
Auto Setup
Manual Setup
4
CH:21
TV System : G
:
VCR Output CH : CH 36
CH:36
:
5
CH:69
6
22
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the corresponding , buttons to select the
œ ❷ Install
option.
Press the OK button to select this option.
Result: The menu is displayed.
Install
Press the or buttons, until the TV System option is
œ ❷
selected.
Press the ➛ or ❿ button to select G,I,K,B or M.
On completion, press RETURN to exit the menu.
After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
Press the corresponding , buttons to select the Install
œ ❷
option.
Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
Press the œ or ❷ buttons, until the VCR Output CH option is
selected.
Select the required output channel (CH21~CH69) by pressing the
OK or ❿ buttons.
CH21 . . CH36 . . CH69
On completion, press RETURN to exit the menu.
Then tune your television again (see page 14).

Selecting the Colour Mode

Before recording or playing back a cassette, you can select the
required system standard.
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
After pressing the MENU, press the OK or ❿ .
1
Result: The Setup menu is displayed.
2 Press the corresponding , buttons to select the
œ ❷
User Set option.
Press the OK or ❿ to select this option.
3
Result: The menu is displayed.
User Set
4
Press the corresponding œ or ❷ buttons, until the
System option is selected.
Press the OK or ❿ button to select
5
Auto PAL MESECAM
B/W .
B/W Black and White
6
On completion, press RETURN three time to exit the menu.
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
User Set
Auto
Colour System : Auto
PAL
NICAM : On
MESECAM
IPC : On
B/W
Colour
G-Code Extend : Off
23
GB