Table of Contents
Advertisement
DVD-90K_CHN-GB1.q 2003.4.11 11:14 AM "≥√Ê18
VCR
Presetting the Stations Automatically
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can be
done:
You can store up to 50 stations.
18
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Plug & Auto Set up (see page 13)
Automatically
Manually (see page 19)
1
After pressing the ≤Àµ•(MENU), press the »∑∂®(OK)or
Result:
The Setup menu is displayed.
2
Press the corresponding
,
buttons to select the
I n s t a l l
option.
3
Press the »∑∂®(OK)or
to select this option.
Result:
The
Install
menu is displayed.
4
Press the corresponding
or
buttons, until the
Auto Setup
is selected.
And then press the »∑∂®(OK)or
to select this option.
Result:
A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
5
Press »∑∂®(OK)button.
Result:
A message appears, indicating that any channels
already preset on your VCR will be deleted.
6
Press »∑∂®(OK)to start the auto scanning.
Result:
The
Please Wait
indication highlight on the
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The DVD-VCR then searches for the second station
and so on.
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
7
If you wish to cancel the auto scanning before the end, press the
≤Àµ•£®MENU)button to exit the menu.
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the ones
no longer required (see page 20).
.
Advertisement
Table of Contents
