Table of Contents
Advertisement
DVD-90K_CHN-GB2.q 2003.4.11 11:16 AM "≥√Ê24
VCR
NICAM
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 35.
On
Off
24
1
After pressing the ≤Àµ•(MENU), press the »∑∂®(OK)or
Result:
The Setup menu is displayed.
2
Press the corresponding
,
buttons to select the
User Set
option.
3
Press the »∑∂®(OK)or
to select this option.
Result:
The
User Set
menu is displayed.
4
Press the corresponding
or
buttons, until the
N I C A M
s selected.
5
To...
Press »∑∂®(OK)or , until...
Mono mode
O f f
is displayed.
Off: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode
O n
is displayed.
On: Normally set at this position.
6
On completion, press ∑µªÿ(RETURN) three times to exit the menu.
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the ≤Àµ•( M E N U ) button on the remote
control.
Result:
The Setup menu is displayed.
.
2
Press the »∑∂®(OK)or
.
Result:
The Setup menu is displayed.
3
Press the corresponding
option.
4
Press the »∑∂®(OK)or buttons to select this option.
Result:
The
User Set
option
5
Press the corresponding
selected.
6
Press the »∑∂® ( o k ) or
picture
control) option.
When intelligent picture control mode is
of the image is adjusted automatically.
7
To adjust the sharpness manually, press the
O F F
IPC mode
.
8
Press the
or
buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
PICTURE
menu disappears automatically.
9
On completion, press the ∑µªÿ(RETURN) button again.
Intelligent Picture Control ( Remote Control )
1
During playback, press the IPC button.
Result:
The
P I C T U R E
2
Press the
button to turn the IPC (Intelligent Picture Control)
option
O N
and
O F F
.
When Intelligent Picture Control mode is
of the image is adjusted automatically.
3
To adjust the sharpness manually, select Intelligent Picture Control
mode
O F F
.
The horizontal picture adjusting appears.
4
Press the
or
buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
P I C T U R E
menu disappears automatically.
5
On completion, press the IPC button again.
,
buttons to select the
User Set
menu is displayed.
or
buttons, until the
I P C
option is
buttons to select the IPC (intelligent
, the sharpness
O N
button to turn the
menu is displayed.
O N
, the sharpness
VCR
On
Off
VCR
1
25
Advertisement
Table of Contents
