Table of Contents
Advertisement
DVD-90K_CHN-GB2.q 2003.4.11 11:16 AM "≥√Ê19
Presetting the Stations Manually
You do not need to preset the stations manually if you
have already set them automatically.
1
After pressing the ≤Àµ•(MENU), press the »∑∂®(OK)or
Result:
The Setup menu is displayed.
2
Press the corresponding
,
buttons to select the
option.
3
Press the »∑∂®(OK)or to select this option.
Result:
The
I n s t a l l
menu is displayed.
4
Press the corresponding
or
buttons, until the
S e t u p
option is selected.
5
Press the »∑∂®(OK)or to select a
Manual Setup
Result:
The
TV STATION TABLE
menu is displayed.
6
Press the
or
buttons to select a programme number as
required.
7
Press the button to preset the station.
Result:
The
MANUAL TUNING
menu is displayed.
8
Press the
or
buttons to start scanning channel.
Result:
The frequency band is scanned and the first station
found is displayed.
9
If you...
Then...
Wish to store the
Press the
or
buttons until the
station displayed
is selected.
Press the
or
buttons to adjust the
picture, if necessary.
Press »∑∂®(OK)to store the station
Do notwish to
Press the
or
buttons until the
store the station
is selected.
displayed
Press the
or
buttons to go on
scanning the frequency band and display
the next station
Go back to the beginning of Step
10
6
Repeat this procedure from Step
onwards, until all the required
stations have been stored.
11
On completion, press the ∑µªÿ(RETURN) button three times to exit
the ≤Àµ•(MENU).
VCR
.
I n s t a l l
M a n u a l
option.
M F T
C H
14
19
Advertisement
Table of Contents
