Connecting Your Dvd-Vcr - Samsung DVD-V642K Instruction Manual

Connecting Your DVD-VCR

Connecting DVD-VCR to the TV using the
A/V Cable
You can connect your DVD-VCR to the television using the
A/V cable if the appropriate input is available on the televi-
sion. You thus:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your DVD-VCR
• Regardless of the type of connection chosen, you must
always connect the coaxial cable supplied. Otherwise, no
picture will be visible on the screen when the DVD-VCR is
switched off.
• Make sure that both the television and the DVD-VCR are
switched off before connecting the cables.
CAMCORDER
1. Connect the coaxial cable as indicated in the above
section.
2. Connect one end of the Audio/Video cable to the Video
output and Audio L, R output socket on the rear of the
DVD-VCR.
3. Plug the other end into the appropriate connector on the
television.
4. To view DVD-VCR, you must select AV mode on your TV.
R L VIDEO VIDEO
AUDIO
R L R L Y P P
R
AUDIO AUDIO OUT COMPONENT VIDEO OUT
Connecting DVD-VCR to a Satellite
Receiver or Other Equipment
You can connect other audio and/or video equipment to your
DVD-VCR in different ways. The following illustrations give a
few examples of the connection possibilities.
• The AV input/output connectors on the rear of the DVD-
VCR are used for equipment, such as camcorders, VCRs
or sound systems.
B
5