VCR
S-VHS Play
Language
: English
Install
User Set
GB
Auto Power Off
: Off
Screen Messages
: On
VCR Setup
Tape Select
: E180
Repeat Play
: Off
Off
S-VHS
: Off
On
VCR
Selecting the Recording Speed
Type
Recording Time (in SP)
E-180
180 mins. or 3 hours
E-240
240 mins. or 4 hours
E-260
260 mins. or
4 hours and 20 mins.
E-300
300 mins. or 5 hours
OK
28
The DVD-VCR allows you to playback high quality S-VHS tapes.
1
During S-VHS play mode after pressing the MENU press the
corresponding
,
buttons to select the
VCR
❷
2
Press the OK or ❿ button to select this option.
Result:
The
VCR Setup
menu is displayed.
3
Press the corresponding
or
buttons, until the
❷
option is selected.
4
Press OK or ❿, until...
To...
S-VHS play
On
is displayed.
Do not wish to S-VHS play
Off
is displayed.
5
On completion, press RETURN twice to exit the menu.
To watch S-VHS tapes, set the S-VHS mode to
Setup.
You can record a cassette at two different speeds:
N SP (Standard Play)
N LP (Long Play)
In Long Play modes:
N Each cassette lasts twice as long
N The recording is of a slightly lower quality
To record a cassette...
Press the SPEED button on the
remote control, until...
In standard play mode
SP
is displayed.
In long play mode
LP
is displayed.
Audio Dubbing a Pre-recorded Cassette
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
N A CD, DVD
option.
N A microphone connected to a sound system
N A cassette player
Restriction:
S-VHS
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
1
Connect an RCA audio cable to the appropriate output on your
sound system (cassette player for example).
2
Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the Front of your DVD-VCR.
On
in the VCR
3
Insert the pre-recorded cassette on which the audio track is to be
replaced, and press the
4
Search for the Audio Dubbing (ending) point using the
the counter to 0:00:00 by pressing CLOCK/COUNTER and
CLEAR.
5
Search back slightly beyond the Audio Dub start point using the
button.
6
Press the
Press the
7
Press A.DUB.
Result:
8
Press the INPUT SEL. button to select Audio dubbing source.
ex) If you want to dub external cassette player, then select LINE.
9
On the sound system, locate the point on the cassette at which
you wish to start playback.
Example: The track that you wish to record on the cassette.
10
When you are ready:
N
Start playback on the sound system
N
Press the REC on the remote control.
Result:
11
The audio dubbing will finish when the counter reaches 0:00:00.
➢
The new sound will be recorded on the normal sound
track of the tape, and the original sound will remain on
the Hi-Fi sound track.
To hear the new sound and original sound mixed
together, press the Audio button on the remote control
until the MIX option is displayed (see page 34).
❿
ll to start playback.
❿ ❿
, and set
➛ ➛
❿
ll button.
❿
ll button one more time to make STILL mode.
Your DVD-VCR is now in the Audio dubbing Still
mode.
The soundtrack is replaced on the pre-recorded cassette.
VCR
4
5
VIDEO EDIT
GB
6
A.DUB
10
A.DUB
EJECT
2
2
7
OK
A.DUB
-0:05:23
29