Deck Control Buttons; Basic Dvd Playback; Basic Vhs Playback; Basic Tv Tuner Operations - Samsung CHT-420 Instruction Manual

Deck Control Buttons

The DVD-VCR uses one set of controls to operate both decks. The
following buttons are helpful in successfully controlling each deck.
1 POWER Button
1
Press the POWER button on the remote control or front panel to
turn on the DVD-VCR.
2 DVD Button
Press the DVD button on the remote control or front panel when
you want to control the DVD deck.
• The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
3 VCR Button
Press the VCR button on the remote control or front panel when
you want to control the VCR deck.
2
• The VCR indicator will light on the Front Panel Display to show
3
that the VHS deck is selected.
4 INPUT SEL. Button
Press the INPUT SEL. button repeatedly to cycle through all of
your input sources, including the Tuner (Ch##), Line 1, Line 2.
4

Basic DVD Playback

Follow these instructions to playback a DVD.
1 Open Disc Drawer
Press the OPEN/CLOSE button on the remote control or front
panel to automatically power on the DVD-VCR and open the disc
drawer.
OPEN/CLOSE
2 Insert Disc
1,3
1,3
REC S.MODE S.EFFECT
Place the disc in the drawer with the label side of the disc facing
up. If the disc has two sides, orient the disc with the desired label
facing up.
3 Close Disc Drawer
Press the OPEN/CLOSE button on the remote control or front
panel to close the disc drawer.
4 Play the DVD
OPEN Press the
panel.
NES REC S.MODE S.EFFECT
• Many discs will begin playback automatically when the disc
4
drawer closes.
4
• If the DVD has a disc menu, or more than one title, the disc
menu may appear.
5 Additional DVD Options
• For advanced DVD Setup options, see pages 24~29.
• For special DVD Playback features, see pages 30~39.
14
❿
ll (Play/Pause) button on the remote control or front

Basic VHS Playback

To play a videotape, simply insert it in the VHS deck and press the
Play button. Tapes without Record Safety Tabs can be set to play
automatically when inserted; see page 41.
1 Insert VHS Tape
Insert a standard VHS videotape into the VHS Deck.
• Power will turn on automatically when you insert a videotape.
2 Play Tape
❿
Press the ll (Play/Pause) button on the remote control or front
panel. If the tape is missing the Record Safety Tab and Auto Play
is turned on, the tape will begin to play automatically, see page 41.
3 Stop Playback
Press the (Stop) button on the remote control or front panel.
4 Eject Tape
Press the OPEN/CLOSE button on the remote control or the
EJECT button on the front panel.
5 Additional VCR Options
• For special VCR Playback features, see pages 40~41.
• For VCR Recording features, see pages 43~45.
• For Timer Recording features, see page 46.

Basic TV Tuner Operations

The following buttons are used when watching television via the
DVD-VCR's built-in TV tuner.
1 TV/VCR
Press to switch between your TV's tuner and the VCR's internal
tuner.
2 Channel Up/Down
Press to change to the next or previous channel.
3 0-9 Buttons
Press to select channels directly.
4 INFO.
Press to INFO. the channel you are watching.
• Also works in DVD and VCR mode.
EJECT
1
CHANNEL DVD VCR FM/AM INPUT VOL 4
3
2
3
1
2
2
4
15