Auto Play; S-Vhs Playback - Samsung CHT-420 Instruction Manual

Auto Play

If you want your videotapes to play automatically when you insert
them, turn on Auto Play.
NOTE: Only tapes that are missing the Record Safety Tab will
play automatically when inserted.
1 Open the "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "VCR"
Using the up/down and left/right buttons, move the selection arrow
MAIN MENU
to "VCR Function Setup," then press ENTER to select.
DVD VCR VCR Options Language
3 Select "Auto Play"
Move the selection arrow to "Auto Play," then press right to select
Program Clock Install Exit
VCR Function Setup
from the following options:
• On - The VCR will automatically begin playing a video tape
RETURN ➛ ❿ ENTER
❷
when it is inserted, as long as the safety tab of the cassette has
been removed.
• Off - Auto play is disabled.
VCR FUNCTION SETUP
4 Tape Length
Tape Length T120
Press the left button to select the video cassette length.
On
Auto Play ➛ ❿ On
Off
This information is usually printed on the tape box. The menu
Auto Repeat Off
cycles through: T120, T160 or T180. Once the type of cassette is
set, the VCR can display the amount of time remaining on the tape
when you press the INFO. button.
RETURN
❷
5 Auto Repeat
In the VCR Function Setup " Auto Repeat" sets the VCR to
play a tape repeatedly [unless a tape control is activated (stop, fast
forward or rewind)].

S-VHS Playback

The DVD-VCR allows you to playback high quality S-VHS tapes.
1 Insert a S-VHS Tape
Insert an S-VHS tape into the VCR deck.
2 Start Playback
Press Play/Pause on the remote control to begin playback of the S-
VHS tape.
40