Channel Add/Delete; Rf Output Channel; Front Panel Dimmer; Auto Power Off - Samsung CHT-420 Instruction Manual

Channel Add/Delete

Use this feature if Auto Channel Search missed a channel that you
would like to add, or added a channel you wish to remove.
1 Open "MENU"
1
With the DVD in stop mode, press the MENU button.
2 Select "Install"
Using the up/down and left/right buttons, move the selection cursor
to "Installation", then press ENTER to select.
3 Select "Channel Setup"
Using the up/down buttons, move the selection cursor to "Channel
MAIN MENU
setup", then press ENTER to select.
DVD VCR Options Language
4 Select "Channel add/delete"
Move the selection bar to "Channel add/delete," then press ENTER
Install
Program Clock Install Exit
Installation to select.
RETURN ➛ ❿ ENTER
❷
5 Select Channel to add/delete
Use the CH
to add or remove.
INSTALLATION
6 Select "Channel add/delete"
❿
Channel setup
Press right to add or press left to remove the channel from
Volume light : [Auto]
your channel list.
• Repeat steps 4 and 5 to add or remove additional channels.
RETURN ENTER
❷
CHANNEL SETUP
Ant/Cable: [Cable TV]
Auto channel memory
❿
Channel add/delete
RETURN ENTER
❷
CHANNEL ADD/DELETE
Select channel : [ 01]
❿
and press [ ] to ADD
➛
press [ ] to DELETE
RETURN CH ❷
20
/❷ buttons to tune in the channel number you wish

RF Output Channel

1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "Options"
Using the up/down and left/right buttons, move the selection cursor
to "Option Setup," then press ENTER to select.
3 Select "RF Output Channel"
Move the selection bar to "RF Output Channel", then press right
to change.
4 Change "RF Output Channel"
Press Return to change. A message will appear on your TV.
Then press ENTER to change.
5 Change "TV Channel"
A message will appear on your TV. When the message disappears,
change your TV to channel 3 or 4 to match the RF output channel
of the player.

Front Panel Dimmer

You can set the Front Panel Display to be bright all the time, dim
all the time, dim during power off.
1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "Options"
Using the up/down and left/right buttons, move the selection cursor
to "Option Setup," then press ENTER to select.
3 Set "Panel Display"
Move the selection bar to "Panel Display," then press right to select
from the following options:
• Auto – Front Panel Display will dim automatically during
power off.
• Bright – Front Panel Display will be bright all the time.
• Dim – Front Panel Display will be dim all the time.
MAIN MENU
DVD VCR Options Options Language
Program Clock Install Exit
Option Setup
➛ ❿
RETURN ENTER
❷
OPTION SETUP
3CH
RF Output Channel ➛❿ 3CH
4CH
Panel Display Auto

Auto Power Off

Off
RETURN ❷
MAIN MENU
DVD VCR Options Options Language
Program Clock Install Exit
Option Setup
RETURN ➛ ❿ ENTER
❷
OPTION SETUP
RF Output Channel 3CH
Auto
➛❿ Auto
Panel Display
Bright
Auto Power Off Off
Dim
RETURN ❷
21