Connecting The Speakers; Volume Light; Speaker Volume Control - Samsung CHT-420 Instruction Manual

Connecting the Speakers

Connect the front, center, and surround speakers and the
subwoofer to the speaker terminals on the back of the main unit.
1 Connect the speakers to the speaker output terminals on the back
of the main unit, matching the colors.
Caution
Do not set the Speakers (except center speaker) near the TV or Monitor
because they are not magnetic shielded.
Front Speaker (R)
Center Speaker
Front
Speaker (L)
Subwoofer
Surround
Surround
Speaker (L)
Speaker (R)
Center Speaker
Surround
Speaker (R)
SPEAKERS
CENTER SURROUND L
DVD & VCR
RADIO ANT.
AUDIO
IN
LINE LINE LINE
FM (FROM ANT.) IN 1 IN 2 OUT
75
COAXAL
R
WOOFER SURROUND R
RF OUT
L
AM (TO TV)
VIDEO
Front Speaker (R)
48
Surround
Speaker (L)
FRONT L
SPEAKERS
FRONT R
CENTER SURROUND L FRONT L
DVD Olny
S-VIDEO OUT
WOOFER SURROUND R FRONT R
COMPONENT VIDEO OUT
Front Speaker (L)
Subwoofer

Volume light

1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "Install"
Using the up/down and left/right buttons, move the selection cursor
to "Installation", then press ENTER to select.
3 Select "Volume light"
Move the selection arrow to "Volume light", then press right to
select from the following options.
• Auto - Volume light (light surrounding main unit volume control)
will be turned off automatically.
• On - Volume light will be bright all the time.

Speaker Volume Control

1 AMP Volume Control
• Connect the speakers to the speaker jack on the rear.
• When you turn the power ON, if the last volume level was over
20, the volume will be set to 20, and if it was under 20, the
volume will be set to that level.
2 Headphone Volume Control
• You can adjust the volume by connecting the headphone to the
Headphone JACK on the front panel.
• The speakers will be muted.
• The LINE OUT AUDIO will be output continuously while the
Headphone is connected.
MAIN MENU
DVD VCR Options Language
Program Clock Install Install Exit
Installation
RETURN ENTER
❷
INSTALLATION
Channel setup
Auto
❿
Volume light : [Auto]
On
➛ ❿
RETURN ❷
49