Table of Contents
Advertisement
Convenient features for auto-answering
Checking Caller's Voice
You can check the
1
caller' ' s voice
through the
speaker during a
Base Set in
recording .
standby mode
Press
button.
4
To enable
To disable
Using the Auto-Answering from a Remote Location
1
You can control the
auto-answering
function from a
remote location.
Don' ' t forget your
password.
The initially set
Press
button before
password is 0000.
you leave your home.
4
If you did not set the auto answering, the remote ringer will ring several times
(initially set to 10 times) before playing the recorded message.
If the button to control from a remote location does not work well,
press it for a little bit longer.
43
(Using Base Set)
2
3
�
�
5
You will hear a
�
beep confirming
the completion of
the setting.
(Remote control)
2
3
�
�
Dial your number from
When you hear the
a remote location.
recorded message
5
Press the button you
Enter the 4-digit password
want referring to the
�
�
function table on
page 46.
∙
(0000 when purchased)
Convenient features for auto-answering
Selecting the Number of Rings
( Answering machine is turned ON )
1
Press
button.
4
: 3~ 6 Toll Save
or
~ ~
:
number of rings
Selecting the Number of Rings for Remote Control
( Answering machine is turned OFF )
1
You can automatically
set the auto-answering
without having to press
the answer button.
Press
button.
4
�10 times
�12 times
�20 times
�Continuous
● If you did not set the auto answering, the remote ringer will ring according to the set number of
times and then send out a message saying "I am not available right now, Please call again.
Thank you."Then it will automatically hang up.
● You can set the auto answering function from a remote location. (Please refer to page 43).
2
3
�
�
5
You will hear a
�
beep confirming
the completion of
the setting.
2
3
�
�
5
You will hear a
�
voice confirming
the completion of
�15 times
the setting.
44
Advertisement
Table of Contents
