Solving Common Problems
Before contacting an authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Problem
The air conditioner does
operate at all
not
The air conditioner does not
operate with the remote
control
No beep is heard when you
press the
(On/Off) button
on the remote control
The air conditioner does not
cool
The timer is not correctly
triggered
Odors are permeating the
room during air conditioning
Technical Specifications
Design and specifications are subject to change without notice.
Model
AW05MDYEA
Max current is measured according to IEC standard for safety and
current is measured according to ISO standard for energy efficiency.
This condition belongs to the above model.
Explanation / Solution
Check that the circuit breaker used for the air conditioner has not been
triggered.
Check that the power cable is plugged into a wall socket and the socket is
switched on, if necessary.
Check that the temperature indicator on the unit is lit; if necessary,
press the
(On/Off) button on the remote control or unit.
Check that there are no obstacles between you and the unit.
Replace the remote control batteries if necessary.
Check that you are close enough to the unit (seven metres/yards or less).
Check that you are pointing the remote control at the remote control sensor
on the unit.
Replace the remote control batteries if necessary.
Check that the correct operating mode has been selected(Cool).
The room temperature may be too low.
Dust may be blocking the air filter; refer to page 16 for cleaning instructions.
Check that there is no obstacle blocking the air flow into or out of the unit.
Check that the timer has been programmed correctly; refer to page 10~12.
Ventilate the room.
Power Supply
220-240V~, 50Hz
15
E-