Table of Contents
Advertisement
Airing Your Room
If you want to provide air circulation without cooling, you can use
the Fan mode.
1
If necessary, press the
Result:
The air conditioner starts up in the mode selected when
the unit was last used.
The unit beeps twice.
2
If the fan speed(F1, F2 or F3) is not displayed on the control panel:
Press the
button on the unit one or more times until the fan speed
(F1, F2 or F3) is displayed.
Result:
The unit beeps each time you press the
The air conditioner starts up in Fan mode.
You can change modes at any time.
When the air conditioner is in the Fan mode, the temperature
cannot be set or displayed.
3
To set the fan speed:
Press the
button on the unit one or more times until the
desired fan speed(F1, F2 or F3) is displayed.
Low
Medium
High
4
To control the direction of the air flow, refer to page 9.
(On/Off) button.
button.
c
7
E-
Advertisement
Table of Contents
