Table of Contents
Advertisement
Selecting Energy Saving Mode
If you wish to save energy when using your air conditioner,
select the energy saving mode.
1
To select the energy saving mode, press the
or more times until the Energy Saver indicator lights up.
Result:
The fan and compressor cycle on and off together.
The fan will continue to run for a short time after the
compressor cycles off.
If you would like the air conditioner to run in Fan mode, do not press
the
button. You cannot use the Fan mode in the energy saving
mode.
2
To stop the energy saving mode, press the
again.
Result:
The fan runs at all times, while the compressor cycles on and off.
If you select the Sleep Timer in the Energy Saving mode, the Energy
Saving will be cancelled and the air conditioner will start up in the
Sleep Timer mode.
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges
within which the air conditioner can be used.
Mode
Indoor Temperature
Cooling
21°C to 32°C approx.
If the air conditioner is used at...
Higher temperature
Lower temperature
Higher humidity levels
button on the unit one
button on the unit
Outdoor Temperature
21°C to 43°C approx.
Then...
The automatic protection feature may be triggered and the air
conditioner stopped.
A water leakage or some other malfunction may happen if the
heat exchanger freezes.
Water may condense on and drip from the surface of the
unit if it is used for long periods.
Indoor Humidity
80% or less
13
E-
Advertisement
Table of Contents
