Solving Common Problems; Technical Specifications - Samsung AHT18F1MBA Owner's Instructions Manual

Solving Common Problems

Before contacting the after-sales service, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
PROBLEM
The air conditioner does not
operate at all
The air conditioner does not
cool
The air flow direction does not
change when you set the air flow
blade swing switch to the ON
position
Odours are permeated in the
room during air conditioning

Technical Specifications

12
E-
EXPLANATION / SOLUTION
Check that the circuit breaker used for the air conditioner
has not been triggered.
Check that the power cable is plugged into a wall socket and the
socket is switched on, if necessary.
Check that the correct operating mode has been selected
(COOL, HEAT or FAN)
Check that the correct operating mode has been selected.
The room temperature may be too low or too high.
Dust may be blocking the air filter;
refer to page 11 for cleaning instructions.
Check that there is no obstacle blocking the air flow into or out of the unit.
Check that the air conditioner has been switched on;
if necessary, turn the operating mode selection dial.
Air the room.
Design and specifications are subject to change without notice.
Model
AHT24F1ME
AHT24F1MEB
AHT18F1ME
220-240V~, 50Hz
AHT18F1MEA
AHT18F1MEB
AHT19F1MEB
AHT24F1MB
AHT24F1MBA
AHT20F1MB
AHT20F1MBA
AHT18F1MBB
AHT18F1MBC
Power Supply
220V~, 60Hz