Table of Contents
Advertisement
Adjusting the Air Flow Direction Vertically
Depending on the position of the indoor unit on the wall of your room,
you can adjust the position of the outer air flow blade on the bottom of
the unit, thus increasing the efficiency of the air conditioner.
1
Press the SWING button one or more times as required.
Result:
RECOMMENDATION
2
If you want the blade to move up and down automatically when the air
conditioner is operating, press the SWING button.
Result:
3
To stop the blade moving up and down, press the SWING button again.
N N
o o
t t
e e
N N
o o
t t
e e
Adjusting the Air Flow Direction Horizontally
There are two sets of inner air flow blades. Just as the outer air flow
blade can be adjusted vertically, the inner blades can be adjusted
horizontally.
1
Open the air flow blade along the bottom of the indoor unit, by
pressing the SWING button.
2
To stop the blade moving up and down, press the SWING button
again.
3
Adjust each set of inner blades to the required position, by pushing or
pulling them sideways.
Get user manuals:
See SafeManuals.com
The outer blade is adjusted vertically.
When...
Cooling
The blade move up and down, around the base position set.
If you switch the air conditioner... Then the blade is...
Off
On again
Adjust the blade to face...
Upwards.
Closed completely.
Reset to the position that you
previously selected.
15
E-
Advertisement
Chapters
Table of Contents
