Table of Contents
Advertisement
WHAT IS NITROUS OXIDE?
Nitrous Oxide is a cryogenic gas composed of nitrogen and oxygen molecules. It is stored as a "gas over a liquid" which means that both liquid
and gaseous nitrous oxide is delivered into your engine. It is 36% oxygen by weight, which is what produces the added horsepower. By injecting
more oxygen (and a corresponding fuel signal), we create the additional power much like a supercharger or a turbocharger does.
Nitrous Oxide is considered an "oxidizer" and not a fuel. Nitrous oxide is non-flammable by itself. Because nitrous oxide is a cryogenic, the same
safety methods in handling dry ice apply to nitrous. Direct contact with the skin will cause a burn similar to contact with dry ice. The exception
in using nitrous oxide comes from increased breathing hazards associated with the gaseous properties of nitrous oxide.
Nitrous Oxide is offered for sale in two common grades, which are U.S.P., and Nytrous Plus . U.S.P. nitrous oxide is medical grade nitrous oxide. Its
common use is dental and veterinary anesthesia as well as use as a propellant in food such as canned whip cream. U.S.P. is not available to the
public and would provide no advantage in the making of horsepower over the automotive grade nitrous oxide.
Nytrous Plus was specifically designed for automotive consumption and differs from U.S.P. in that it contains trace amounts of sulfur dioxide (100
parts per million or "PPM") added to prevent substance abuse. The Sulfur Dioxide is an irritant to all of your breathing passageways and will cause
sore throats and sore nasal passages. Nytrous Plus was specifically created for automotive applications and is available for sale to the public at
many speed shops across the USA.
Safety Steps For Working With Nitrous Oxide
1.
Never inhale Nytrous Plus (Nitrous oxide (N 2 O) for vehicular use) as continued exposure can cause death. Nytrous Plus has a maximum
of 100 parts per million (ppm) of sulfur dioxide and will cause irritation to nose and throat passageways.
2.
When working around any high-pressure gas including nitrous oxide, take all precautions to ensure that exposure to nitrous oxide is
minimized.
3.
Do not vent nitrous oxide to atmosphere in confined spaces. Only vent nitrous oxide in well-ventilated and open areas.
4.
Liquid nitrous oxide can cause burns to human flesh so protect all skin in and around your hands, arms and face. Wear safety glasses
and rubber gloves to protect from liquid nitrous oxide splatter.
5.
When venting down the nitrous system, vent the line down closest to the nitrous bottle.
6.
Do not use any form of Teflon tape as sealant on fitting connections. Use only Teflon paste.
7.
When washing components, ensure the clean components are completely dry, free of oils, and solvents. Failure to remove all liquids
could cause component or system failure.
8.
Always turn the bottle off before making any repairs to the nitrous delivery system.
9.
To safely release nitrous oxide in a pressurized line;
a.
Position vehicle in a well-ventilated, unconfined space.
b.
Turn bottle off.
c.
Slowly loosen the nitrous feed line at the bottle until you hear a light hissing noise.
d.
Allow the entire nitrous pressure to vent from the line.
e.
Perform your work on the system.
f.
Tighten the nitrous line to the bottle.
g.
Slowly open the nitrous bottle valve, listening for leaks.
h.
Perform leak checks on all effected fittings and the bottle fitting.
©2002 Edelbrock Corporation
Rev. 9/02
Page 3 of 21
Brochure No. 63-0142
Catalog #71001
Advertisement
Table of Contents
