Changing Wire-Less Rear Speakers Transmission Channel; Recording To An External Device; Setting The Sleep Timer - Philips LX8500W/69 User Manual

Other Functions
Changing wire-less rear
speakers transmission
channel
The wire-less rear speaker system will
automatically turn on once you power up.
If there is a sound distortion, select
another transmission channel.
1
Press and hold SOUND on the remote
until 'CH X" appears on the display panel.
➜
"X" denotes the frequency channel
1~4.
2
Repeat the above if necessary until you
find a suitable transmission channel.
Helpful Hint:
– The distortion could be the result of
interference caused by other equipment
using same frequency channel in your house
or neighborhood.
Recording to an external
device
1
Connect the external recording device to
LINE OUT (R/L). (See page 12
"Connections-optional").
2
Select the source to record from your
DVD system (DISC, TUNER, TV or
AUX/DI) and start playback (if
necessary).
3
For ultimate recording, press SOUND
to select 'CLASSIC' or 'CONCERT' and
press SURR to select 'STEREO'.
4
Start recording on the external recording
device.
Helpful Hint:
– Refer to the owner's manual of the
connected equipment for details.
40
001-045-LX85-69-Final

Setting the Sleep timer

The sleep timer enables the system to
switch to Eco Power standby mode
automatically at a preset time.
1
Press and hold DIM on the remote until
"SLEEP XX" appear on the display panel
(XX = 15, 30, 45, 60 or OFF).
2
To select the next sleep timer value,
continue pressing DIM button while in
sleep timer mode until it reaches the
desired preset turn-off time.
➜
SLEEP
except if "OFF" is selected.
➜
Before the system switches to Eco
Power standby mode, a countdown of 10
seconds is displayed.
"SLEEP10" ™ "SLEEP 9".... ™
"SLEEP1" ™ "SLEEP"
To cancel the sleep timer
G
Press and hold DIM until "OFF" appears
or press the STANDBY ON (B)
button.
40
will show on the display panel,
3139 115 23231
24/08/2004, 10:43 AM