Sending A Data Or Fax Call - Motorola V120C Reference Manual

Install the Software
Install the software from the CD-ROM that comes with your
Motorola Original data kit. See the data kit's user guide for more
information.

Sending a Data or Fax Call

You can connect your phone to a computer or hand-held device
to send data or a fax from the connected device.
Use this feature to transfer data from your computer onto
another device, and to synchronize phonebook information
between your phone, computer, and/or hand-held device.
Connect your phone (see "Connecting Your Phone to an External
Device" on page 108) and do the following:
Do This
1 Check the phone
2 Open the
application on
your computer
3 End the transfer
on your computer
Data and Fax Calls
To
make sure that the phone is
connected and powered on
place the call through the application
(such as dial-up-networking or fax)
Note: You cannot dial data or fax
numbers through your phone's
keypad. You must dial them through
your computer.
close the call and connection when
the transfer is complete
111