Programmable Auxiliary Functions - Kenwood TK-7150 Instruction Manual

PROGRAMMABLE AUXILIARY FUNCTIONS

Keys y to !1 {pages 4 and 5} can be programmed with the auxiliary functions
listed below. The keys can only be programmed with functions, depending on
whether you are using a Conventional Group or a Trunking System. Please
contact your dealer for further details on these functions.
• Auto Telephone
• AUX A
• AUX B
• Channel/GID* Down
• Channel/GID Recall
• Channel/GID Up
• Direct CH**/GID 1
• Direct CH/GID 2
• Direct CH/GID 3
• Direct CH/GID 4
• Direct CH/GID 5
• Display Character
1
• Emergency Call
• Home Channel/GID
• Horn Alert
• LCD Backlight
1
This function can be programmed only on keys
2
This function can be programmed only on keys
3
These functions can be used only in Conventional Groups.
4
This function can be selected only when the Scrambler board has been installed.
5
This function can be selected only when an external GPS receiver has been installed.
* GID = Group ID
** CH = Channel
The selector can be programmed with the following three functions. Please
contact your dealer for further details on these functions.
• Channel/GID Up/Down
• None
• Zone Up/Down
2
• Message Mode
• Monitor
• None
• Operator Selectable Tone
• Public Address
• Scan
• Scan Del/Add
4
• Scrambler
5
• Send GPS
• Speaker Internal/External
3
• Squelch Level
• Talk Around
• TEL Disconnect
3
• 2-Tone Encode
• Zone Down
• Zone Up
y to !1 ( to
PF1
u, i !1
and (
PF2
3
).
PF6
, and ).
PF3 PF6
7