Kenwood TK-7150 Instruction Manual
Kenwood TK-7150 Instruction Manual

Kenwood TK-7150 Instruction Manual

Vhf/vhf fm vhf
Hide thumbs Also See for TK-7150:

Advertisement

KENWOOD CORPORATION

INSTRUCTION MANUAL

THANK YOU!

We are grateful you chose KENWOOD
transceiver will provide dependable communications to keep personnel operating at peak efficiency.
KENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will
KENWOOD
KENWOOD
KENWOOD
be pleased with the quality and features of this product.
MODELS COVERED
MODELS
MODELS
MODELS
COVERED BY
COVERED
COVERED
The models listed below are covered by this
VHF FM Transceiver
.TK-7150:
. . . . TK-8150:
UHF FM Transceiver

NOTICES TO THE USER

WARNING:
GOVERNMENT LAW PROHIBITS THE OPERATION OF UNLICENSED RADIO TRANSMITTERS WITHIN THE
◆ ◆ ◆ ◆
TERRITORIES UNDER GOVERNMENT CONTROL.
ILLEGAL OPERATION IS PUNISHABLE BY FINE AND /OR INPRISONMENT.
◆ ◆ ◆ ◆
REFER SERVICE TO QUALIFIED TECHNICIANS ONLY.
◆ ◆ ◆ ◆
SAFETY:
It is important that the operator is aware of、and understands、hazards common to the operation of any
transceiver.
WARNING:
EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.)
◆ ◆ ◆ ◆
Turn off your transceiver while taking on fuel, or while parked in gasoline service stations. Do not carry spare
fuel containers in the trunk of your vehicle if your transceiver is mounted in the trunk area.
INJURY FROM RADIO FREQUENCY TRANSMISSIONS
◆ ◆ ◆ ◆
Do not operate your transceiver when somebody is either touching the antenna or standing within two to three
feet of it, to avoid the possibility of radio frequency burns or related physical injury.
DYNAMITE BLASTING CAPS
Operating the transceiver within 500 feet (150m) of dynamite blasting caps may cause them to explode.
Turn OFF your transceiver when in an area where blasting is in progress, or where "TURN OFF
RADIO" signs have been posted. If you are transporting blasting caps in your vehicle, make sure they are
carried in a closed metal box with a padded interior. Do not transmit while the caps are being placed into or
removed from the container.
PRECAUTIONS
Please observe the following precautions to prevent fire, personal injury, and transceiver damage.
.Do not attempt to configure the transceiver while driving , it is too dangerous.
.Do not modify the transceiver for any reason.
.Do not expose the transceiver to long periods of direct sunlight, nor place it near heating appliances.
.Do not place the transceiver in excessively dusty, humid , or wet areas, nor on unstable surfaces.
.If an abnormal odor or smoke is detected coming from the transceiver, turn OFF the power immediately.
Contact your KENWOOD
KENWOOD dealer.
KENWOOD
KENWOOD
FCC WARNING
This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause
harmful interference unless the modifications are expressly approved in the instruction manual. The user could
lose the authority to operate this equipment if an unauthorized change or modification is made.
KENWOOD for your land mobile radio applications. We believe this easy-to-use
KENWOOD
KENWOOD
BY THIS
BY
BY
THIS MANUAL
THIS
THIS
MANUAL
MANUAL
MANUAL
TWO-WAY

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood TK-7150

  • Page 1: Instruction Manual

    KENWOOD KENWOOD KENWOOD KENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will be pleased with the quality and features of this product. MODELS MODELS...
  • Page 2: Unpacking And Checking Equipment

    KENWOOD KENWOOD KENWOOD service facility, or the factory. Carefully unpack the transceiver. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately.
  • Page 3 KENWOOD CORPORATION Note Note Note Note: The following preparation instructions are for use by your KENWOO KENWOO KENWOO KENWOOD D D D dealer, an authorized KENWOOD KENWOOD KENWOOD KENWOOD servise facility, or the factory. TOOLS REQUIRED Note Note: Before installing the transceiver, always check how far the mounting screws will extend below the mounting...
  • Page 4 KENWOOD CORPORATION GETTING ACQUAINTED ORIENTATION ① ⑧ ② ③ CALL VOL KNOB CH KNOB POWER KEY ⑨ BUSY INDICATION KEY1 KEY2 KEY3 KEY4 KEY5 KEY6 TX INDICATION MICROPHONE TERMINAL ⑦ ⑥ ④ ⑤ Functional and Operational specifications 1)Front Panel 1)...
  • Page 5 KENWOOD CORPORATION 2)Switch( ( ( ( Push type) ) ) ) 2) 2) 2) Description Name Power ON/OFF POWER 1 Programmable Default::Zone Up KEY1 2 Programmable Default: Zone Down KEY2 3 Programmable Default: None KEY3 4 3)DISPLAY LCD 3) 3)...
  • Page 6: Operating Basics

    KENWOOD CORPORATION Description Name Alphanumeric display Channel/GID display Zone display 1 Channel/GID display Zone display 2 Call display CALL 3 Monitor ON display 4 Monitor ON display 5 Speaker B display 6 Option ON display 7 AUX A display 8...
  • Page 7 KENWOOD CORPORATION Transmitting ◆ Note Note: Before transmitting, first monitor the channel to make sure it is not already in use. Note Note 1 Select your desired channel. ・If the channel is busy, wait until it becomes free. Press the microphone PTT PTT switch and speak into the microphone.
  • Page 8 KENWOOD CORPORATION...
  • Page 9 KENWOOD CORPORATION...
  • Page 10 KENWOOD CORPORATION...

This manual is also suitable for:

Tk-8150

Table of Contents