Tuning In To A Non-Preset Radio Station (Auto Tuning, Manual Tuning) - Kenwood R-K701 Instruction Manual

Receiving broadcast station
Tuning in to a non-preset radio station
Select the tuning mode according to the radio
wave receiving condition.
Auto tuning: When the receiving condition
is good.
Manual tuning: When the receiving condition
is poor. (Weak radio waves)
1 Select the tuner input.
2 Press the TUNING MODE [AUTO/MONO]
key to select a tuning type of Auto or
Manual.
TUNING MODE
3 Tune in to a station by pressing the 4 /
¢ [1 / ¡] key.
To decrease
frequency
To decrease
frequency
(Auto tuning, Manual tuning)
or
To increase
frequency
or
To increase
frequency
÷ In MANUAL mode, FM stations are received in mon-
aural.
Each press of the TUNING MODE key changes the
tuning types.
Auto tuning : "AUTO TUNE" is displayed.
The AUTO indicator lights up.
Stereo reception
Manual tuning : "MANUAL TUNE" is displayed.
The AUTO indicator goes off.
Monaural reception
÷ Normally, use the Auto tuning (stereo reception).
Auto tuning :
The next station can be received automatically every
time the 4 / ¢ key is pressed.
Manual tuning :
Press the 4 / ¢ key repeatedly until the desired
station is received. The desired station can also be re-
ceived by holding the 4 / ¢ key down until its fre-
quency is displayed.
27
EN