Operating Powertouch Without Sending Commands To The Receiver(Operations Using The Shift Key) - Kenwood KRF-V9993D How To Operate

How Do I Operate Devices?
Operating PowerTouch without Sending Commands to the Receiver
(Operations using the SHIFT key):
The transmission of operation signals from PowerTouch to the receiver
can be disabled with the Movie or Music menu. This makes it possible,
for example, to turn the VCR ON while listening to a CD.
Procedure:
1. Touch (movie) or (music) in the Quick Access menu to display
the Movie or Music menu.
2. Touch button.
3. Touch the desired operation button within 5 seconds after above.
By touching the SHIFT button and executing an operation, any device
can be controlled without sending the command signal to the receiver.
The above operation is not available with devices connected using the
KENWOOD system control cable.
30