Kenwood KRF-V9993D How To Operate page 93

How Do I Control Home Automation Equipment?
5. Touch on PowerTouch, then press the button on the device's re-
mote that corresponds to the command you want PowerTouch to learn.
The device's remote will send the code to PowerTouch, which will
save it as the command for the button you selected.
This may take a few seconds; do not move PowerTouch or the device's
remote until PowerTouch displays the Accessories Function Modify
menu again, indicating that the learning process is complete.
When PowerTouch has learned the device's IR code, PowerTouch re-
turns to the Accessories Function Modify menu. After a learning pro-
cess is completed, always touch
tion that PowerTouch has learned. If the command or function does
not work, perform the learning process again. You may now control
the accessory using the button you assigned. For more information
on controlling accessories, see the following page.
4 inches (10 cm)
to test the command or func-
83