Using Powertouch To Dim Or Brighten The Receiver's Front Panel; Changing The Front Panel Display Mode - Kenwood KRF-V9993D How To Operate

Digital audio/video receiver
Hide thumbs Also See for KRF-V9993D:
Table of Contents

Advertisement

How Do I Adjust PowerTouch's Display?

Using PowerTouch to Dim or Brighten the Receiver's Front Panel

1. Touch
(Sepup) on the Quick Access menu.
2. Touch
noticeable. It is also possible to disable some indicators (DTS, 96 kfs,
HDCD, DOLBY DIGITAL, MPEG and D.R.I.V.E.) on the receiver. Each
touch of the FL Dimmer button switches the above as shown below.
1 Display/bright
2 Display/dim
3 Display/dim

Changing the Front Panel Display Mode

1. Touch
(Sepup) on the Quick Access menu :
2. Touch
A: Connected Device
DVD :
B: Input Terminal
VIDEO4 :
C: Listen Mode
"Input Type" is displayed only when a selector with digital input is se-
lected.
When the input mode is PHONO, TUNER or AV AUX, the connected
device and listen mode are displayed alternately.
64
to make the receiver display illumination dim and less
Indicators/enabled
Indicators/enabled
Indicators/disabled
.
DOLBY DIGITAL
Input Type
AUTO
Connected Device
DVD

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr-4700Vr-4900

Table of Contents