The Sound Is Distorted, And The Clip Indicator On The; Receiver's Front Panel Flashes Red Continually, Or Stays Red For More Than 1 Second At A Time - Kenwood KRF-V9993D How To Operate
Digital audio/video receiver
Hide thumbs
Also See for KRF-V9993D:
- User manual (114 pages) ,
- Connection manual (180 pages) ,
- Connection and setup manual (62 pages)
Table of Contents
Advertisement
PowerTouch
The sound is distorted, and the CLIP indicator on the receiver's
front panel flashes red continually, or stays red for more than 1
second at a time
Lower the analog input level for the source device you're listening to.
(Setting the proper input level eliminates distortion that occurs if a source
device's output level is too high. When this happens, the front panel CLIP
indicator will flash red continually or remain red for periods of 1 second
or longer. Occasional brief flashing of the CLIP indicator is okay).
1. Select the icon for the source device. For CD1, VIDEO2, VIDEO3, and
VIDEO4, also select the Input Analog icon.
2. Touch
(setup) on the main menu.
3. Select
.
VR-4900/KRF-V9993D
VR-4700
101
Advertisement
Table of Contents
