Kenwood HM-L700 Instruction Manual page 35

3
Select the program timer ON/OFF.
Select "ON" or "OFF", and press the enter/demo
key.
Main unit
Remote control unit
4
Select the days of the week for timer trigger.
Select the days of the week and press the enter/
demo key.
Main unit
Remote control unit
5
Select "ONETIME" or "EVERY WEEK".
Select "ONETIME" or "EVERY WEEK", and
press the enter/demo key.
Main unit
Remote control unit
\
\
\
\
\
\
1 "ON"
Activates the timer function
:
2 "OFF"
Inactivate the timer function
:
÷ If "OFF" is selected, the key function return to ordi-
nary mode.
÷ If the program timer is already set and "OFF" is se-
lected, the program timer is canceled.
To use the previous timer setting
The previous timer setting appears at the start of each
of the below settings. To not change the setting, press
only the enter/demo key.
Each time the 4 or ¢ key is pressed, the display
switches as follows.
"EVERYDAY"
The program timer remains active until it is canceled.
"MONDAY"
"TUESDAY"
"WEDNESDAY"
"THURSDAY"
"FRIDAY"
"SATURDAY"
"SUNDAY"
"MON-FRI"
"TUE-SAT"
"SAT-SUN"
÷ If a timer function other than the days of the week for
timer trigger ("MONDAY" to "SUNDAY") is selected,
proceed the step 6.
Each time the 4 or ¢ key is pressed, the display
switches as follows.
1
"EVERY WEEK" : The timer triggers every week.
2
"ONETIME" : The timer triggers one time only and
is then canceled automatically.
Timer operation
After selection, set
up advances to the
"ONETIME" or "
EVERY WEEK" set-
ting of step 5.
The program timer remains
active until it is canceled.
Continued on next page
35
EN