Playback Of Disc; Basic Play - Kenwood DVF-R4050 Instruction Manual

www.DataSheet4U.com

Playback of disc

Basic play

Preparation
÷ set the POWER ON/OFF switch to the ON (
position.
1
Load a disc
MAIN UNIT
2
Start playback
MAIN UNIT
To stop playback
MAIN UNIT
4
DataSheet U .com
)
REMOTE
6
REMOTE
7
www.DataSheet4U.com
TOP MENU
key
6 (PLAY/
7 (Stop) key
PAUSE) key
POWER ON/ OFF switch
1 Open the tray.
2 Place a disc.
3 To set a disc to a different
disc tray, press the DISC
SKIP key to change the
position of the disc tray.
4 Close the tray.
÷ When the key is pressed, the tray opens.
When the key is pressed again, the tray closes. When the
PLAY/PAUSE key is pressed while a tray is open, the tray
closes automatically, and then playback begins.
When a Disc Menu appears on the screen
In case of interactive DVDs, a Disc Menu appears on the screen.
Then press ENTER to select specific menu you want to play by using
Cursor keys.
When a menu screen is recorded on the
disc, the menu screen will be displayed
when the TOP MENU key is pressed. At
the menu screen, the menu can be se-
lected by pressing the Cursor keys.
TRACK No. (CD)
DVD VCD
C D MP3
TITLE TRACKCHAP HOUR
CHAPTER No. (DVD)
TITLE No. (DVD)
÷ Each press pauses and plays the disc alternately.
RESUME playback
When the STOP key has been pressed once during
playback to stop the playback, and then playback is
started again, play will start from the point where
the playback had been stopped. This is called the
RESUME function. When the STOP key is pressed
again during stop, the RESUME function is can-
celled.
RESUME is cancelled when 5 minutes have passed in
RESUME status.
15
DV-505/DVF-R4050 (EN/K,E,T,Y,X)
6 (Play/Pause) key
7 (Stop) key
0 (open/close) key
Label side
TOP MENU
A B
MIN SEC
Time display
www.DataSheet www.DataSheet4U www.DataSheet www.DataSheet 4U.com 4U 4U .com .com .com