Switching Seek Mode; Selecting The Preset Band; Channel Preset Memory - Kenwood SIRIUS KTC-SR901 Instruction Manual

Operations

Switching Seek Mode

Sets the seeking mode.
<A models>
Press the [AUTO] button.
Each time the button is pressed the Seek
mode switches as shown below.
Display
"Channel"
"Preset"
You cannot operate this unit during switching
Channel or Category.
<B models and C models>
Select Seek Mode in the MENU items of
Control unit to press the [
Each time the button is pressed the Seek
mode switches as shown below.
Display
"AUTO1"
"AUTO2"
"MANUAL"

Selecting the Preset Band

<A models>
Press the [FM] button.
Each time the button is pressed the preset
band switches between the SR1,SR2,SR3 and
SR4.
<B models and C models>
Press the [FM] button.
Each time the button is pressed the preset
band switches between the SR1/Si1,SR2/Si2
and SR3/Si3.
Operation
Normal manual seeking
control.
Search in order of the
channels in the Preset
memory.
4 ¢
]or [ ] button.
Operation
Press the [ ¢ ] button to
seek for channels up the
.
band
Press the [ 4 ] button to
seek for channels down
the band.
Press the [ ¢ ] button to
move to the next preset
channel.
Press the [ 4 ] button to
move to the last preset
channel.
Press the [ ¢ ] button to
increase
Press the [ 4 ] button to
decrease.

Channel Preset Memory

Putting the channel in the memory.
<KDC-X859,KDC-X759,KDC-MP919>
1
Select the preset band
Press the [FM] button.
2
Enter Memory mode
Press the [#3] button for at least 1
second.
"Preset Memory" is displayed.
3
Select the channel to put in the
memory
Press the [4] or [¢] button.
4
Select the preset number
Press the [FM] or [AM] button.
5
Put the channel in the memory
Press the [#3] button for at least 2
seconds.
The preset number display blinks 1 time.
6
Repeating steps 3 to 5 and putting the
desired channel in the memory.
On each band, 1 channel can be put in the
memory on each [#1] — [#6].
7
Exit Memory mode
Press the [#3] button.
<Others>
1
Select the preset band
Press the [FM] button.
2
Select the channel to put in the
memory
Press the [4] or [¢] button.
3
Put the channel in the memory
Press the [#1] — [#6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 channel can be put in the
memory on each [#1] — [#6] button.
• Only the channel number is stored. Category
information is not stored.
• You can set up to 6 memories even on a
control unit with 8 preset buttons.
-
5
English