News Bulletin With Timeout Setting; Auto Memory Entry; Local Seek; Tuning Mode - Kenwood KRC-594 Instruction Manual

Display and Setting
"Contrast 0"/ "CONT 0"
"Contrast 10"/ "CONT 7"

News Bulletin with Timeout Setting

It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00MIN"/"NEWS 00M"
"NEWS 90MIN"/"NEWS 90M"
When "NEWS 00MIN"/"NEWS 00M" — "NEWS 90MIN"/"NEWS
90M" is set, the News Bulletin Interrupt function is ON.
When it's ON, the "NEWS" indicator is ON.
When the news bulletin starts, "News"/"NEWS" is displayed, and
it switches to the news bulletin.
• If you choose the "20MIN"/ "20M" setting, further news bulletins
will not be received for 20 minutes once the first news bulletin is
received.
• The news bulletin volume is the same level that was set for
<Traffic Information> (page 12).
• This function is only available if the desired station sends PTY-code
for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.

Local Seek

Only stations whose reception is good are searched for in auto
seek tuning.
Display
"Local.S OFF"/ "LO.S OFF"
"Local.S ON"/ "LO.S ON"

Tuning Mode

Sets the tuning mode.
Tuning mode Display
Auto seek "Auto 1"/ "AUTO 1"
Preset station seek "Auto 2"/ "AUTO 2"
Manual "Manual"/ "MANUAL" Normal manual tuning

Auto Memory Entry

For the operation method refer to <Auto Memory Entry> (page
11).
— 23 —
<In Tuner mode>
Setting
The local seek function is OFF.
The local seek function is ON.
<In Tuner mode>
Operation
Automatic search for
a station.
Search in order of the
stations in the Preset
memory.
control.
<In Tuner mode>