Disc Naming (Dnps; Text/Title Scroll - Kenwood KRC-594 Instruction Manual

Disc Naming (DNPS)

Attaching a title to a CD.
1
Play the disc you want to attach a name to
• A title can't be attached to a MD.
• Refer to the <Switching Display> (page 8) and select the "DNPS"
display.
2
Enter name set mode
Press the [NAME.S] button for at least 2 seconds.
"NAME SET" is displayed.
3
Move the cursor to the enter character position
Press the [4] or [¢] button.
4
Select the character type (KRC-694 only)
Press the [38] button.
Each time the button is pressed the character typed switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5
Select the characters
Press the [FM] or [AM] button.
6
Repeat steps 3 through 5 and enter the name.
7
Exit name set mode
Press the [NAME.S] button.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Media that you can attach names to
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The name of a CD can be changed by the same operation you
used to name it.

Text/Title Scroll

Scrolling the displayed CD text or MD title.
Press the [DISP] button for at least 1 second.
— 19 —