News Bulletin With Timeout Setting; Local Seek; Tuning Mode; Auto Memory Entry - Kenwood z838w Manual

News Bulletin with Timeout Setting

It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"News :OFF"
"News :00min"
"News :90min"
When "News 00min" — "News 90min" is set, the News Bulletin
Interrupt function is ON.
When the news bulletin starts, "News" is displayed, and it
switches to the news bulletin.
• If you choose the "20min" setting, further news bulletins will not
be received for 20 minutes once the first news bulletin is received.
• The news bulletin volume is the same level that was set for traffic
information (page 25).
• This function is only available if the desired station sends PTY-code
for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.
Local Seek <In Tuner mode>
Only stations whose reception is good are searched for in auto
seek tuning.
Display Setting
"Local.S :OFF" The local seek function is OFF.
"Local.S :ON" The local seek function is ON.
Tuning Mode <In Tuner mode>
Sets the tuning mode.

Tuning mode

Display
Auto seek "Seek :Auto1"
Preset station seek "Seek :Auto2"
Manual "Seek :Manual" Normal manual tuning
Auto Memory Entry <In Tuner mode>
For the operation method refer to <Auto Memory Entry> (page
24).
— 39 —
Operation
Automatic search for a
station.
Search in order of the
stations in the Preset
memory.
control.