Table of Contents
Advertisement
Setting the AV IN-2 Mode <VD2>
Touch
Setting
[7AV-IN1]
It becomes the video mode setting. Operate the
V.SEL button when the image from the device
connected to <AV IN-2> terminal is shown on the
monitor.
[7OFF]
It becomes the OFF mode setting.Use this setting
when there's nothing connected to the <AV IN-2>
terminal.
Setting the Camera Mode <CAMERA/VIDEO>
Touch
Setting
[7AUTO]
It becomes the Rear view camera mode setting.
When the reverse sensor cable is powered up, the
monitor image is switched to the image of the
device connected to the <CAMERA VIDEO IN>
terminal.
[7VD]
It becomes the video mode setting. Operate the
V.SEL button when the image from the device
connected to <CAMERA VIDEO IN> terminal is
shown on the monitor.
[7OFF]
It becomes the off mode setting.Use this setting
when there's nothing connected to the <CAMERA
VIDEO IN> terminal.
Switching to the System Setup screen -2
Touch the [ 3 ] button.
Exit the System Setup screen
Touch the [RTN] button.
Return to the Setup Menu screen.
System Setup screen-2
Setting the AV Output Mode <AV OUT>
Touch
Setting
[7NORMAL]
Picture/sound with monitor picture
[7NAV]
Navigation Sound
[7VD1]
Picture/sound from <AV IN-1> terminal
[7VD2]
Picture/sound from <AV IN-2> terminal
Touch Sensor Tone <BEEP>
Setting the operation check sound (beep sound)
ON/OFF.
Touch
Setting
[7ON]
Touch sensor tone is turned on
[7OFF]
Touch sensor tone is turned off
Return to the System Setup screen -1
Selet the [ 2 ] button.
Exit the System Setup screen
Touch the [RTN] button.
Return to the Setup Menu screen.
English |
67
Advertisement
Table of Contents
